Table of Contents
Advertisement
OPERATION
OPERATION
ADJUSTING POSTURE OF WORK EQUIPMENT
WARNING
When adjusting, it is dangerous if the work equipment is moved by mistake. Set the work equipment in a safe condition, then stop
the engine and lock the work equipment securely with the work equipment lock lever.
BLADE ADJUSTMENT
TILTING THE TILTDOZER
NOTICE
The maximum amount of tilt is 900 mm (2.9 ft).
(When the semi-U blade is used.)
Be sure not to exceed 900 mm (2.9 ft) for the tilt.
Tilt exceeding the maximum limit imposes unnecessary forces onto sections. This may cause damage to the machine.
The following tilt amount can be obtained by operating the blade
control lever.
Right side: 600 mm (23.6 in) or more
Left side: 600 mm (23.6 in) or more
If an even greater tilt is necessary, do as follows.
Use rod (2) installed to the left brace to turn brace (1) and change
the length ( l ) of the brace. This makes it possible to obtain a
maximum tilt of 900 mm (2.9 ft).
Standard distance ( l ) between joints is 1,845 mm (6.0 ft).
3 - 159
Advertisement
Chapters
Table of Contents
