Komatsu D475A-5E0 Operation & Maintenance Manual page 162

OPERATION
ADJUST MIRROR
Be sure to adjust the mirrors before starting work. If they are not adjusted properly, you cannot secure the visibility and may be
injured or may injure someone seriously.
Loosen nut (1) of the mirror and adjust the mirror to a position
where it gives the best view from the operator's seat.
In particular, be sure to adjust the mirror so that people at the rear
left or right of the machine can be seen clearly.
ADJUST JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER) (PCCS LEVER)
After moving case (2) in order to adjust the position of the joystick, secure lock lever (1) into the notched hole, making sure it is
in LOCK position. If it is not completely locked, the joystick may unexpectedly move and cause damage, serious injury, or death.
The joystick (steering, directional and gear shift lever) (PCCS lever) can be adjusted by 100 mm (3.9 in) in 5 stages
to the front or rear. Adjust to the most suitable position to match the adjustment of the operator's seat.
1. Pull up lock lever (1) to FREE position (F) at the rear of case (2)
on left side of the operator's compartment.
2. With lock lever (1) pulled up, use your other hand to grip the
front of case (2), then move it forward with your left and right
hands. The joystick moves with case (2).
3. Move case (2) to the desired position until a click is heard.
Then pull up lock lever (1) and release it. Lock lever (1)
automatically returns to LOCK position.
(a) Front
(b) Rear
REMARK
PCCS: Palm command control system
Your machine may not be equipped with this adjustment
machinery, depending on your machine's specifications.
WARNING
WARNING
OPERATION
3 - 109