TRANSPORTATION
TRANSPORTATION
2. Removing covers inside cab
1) Use a screwdriver to push tab (A) in from the side and
remove louver (1).
2) Remove ashtray assembly (2).
Remove the connector for the cigarette lighter power
supply.
3) Remove rubber sheet (3), and pull it out as it is.
4) Remove the clip, then remove decoration (4).
5) Remove decoration lower plate (5).
6) Remove front cover (6).
Remove connector (11) of sunlight sensor (10) also.
7) Remove entrance cover (7).
8) Remove high mount foot rest (8).
9) Remove cover (9).
3 - 170
OPERATION
OPERATION