Komatsu D475A-5E0 Operation & Maintenance Manual page 81

EXPLANATION OF COMPONENTS
METHOD OF USING MAINTENANCE MODE
NOTICE
This function is only a guideline. If dirty oil or filters are found during daily maintenance, replace them immediately.
If the controllers or monitor panel are replaced, the timer for this function will not work properly. Ask your Komatsu distributor for
replacement.
The maintenance mode shows the replacement interval for the oil
filters and oil on the monitor.
The content of the display is as follows.
(1) The item is displayed.
(2) The time remaining until replacement is displayed.
(3) The number of times that replacement has been made until
now is displayed.
The display items can be displayed in order by operating the information switch to the left or right (<, >).
Display
1. 01 ENG OIL
2. 02 ENG FLT
3. 03 FUEL FLT
4. 04 HYD FLT
4.1. 18 F.PRE FLT
7. 07 DAMP OIL
8. 08 FNL OIL
9. 10 HYD OIL
10. 19 POWL OIL
11. 20 POWL FLT
12. 12 HSS FLT
The item marked * is displayed in the above table, but is not used on this machine.
3 - 28
Item
Engine oil
Engine oil filter
Fuel filter
Hydraulic oil filter
Fuel prefilter
Damper oil
Final drive oil
Hydraulic oil
Power train oil
Power train oil filter
HSS charge filter *
1st replacement 2nd and following
interval replacement intervals
500h
500h
1000h
250h
500h
2000h
250h
250h
250h
250h
0h
OPERATION
500h
500h
1000h
2000h
500h
2000h
2000h
2000h
1000h
500h
0h