Table of Contents
Advertisement
OPERATION
PARKING MACHINE
Avoid stopping suddenly. Give yourself ample room when stopping.
When stopping the machine, select flat hard ground and avoid
dangerous places. If it is unavoidably necessary to park the machine on
a slope, place the parking brake lever (4) in LOCK position and insert
blocks underneath the track shoes. As an additional safety measure,
thrust the blade into the ground.
If the work equipment control lever is touched by accident, the work
equipment may suddenly move, and may cause damage, serious injury,
or death. Before leaving the operator's seat, always secure work
equipment lock lever (7) in LOCK position.
1. Depress brake pedal (1) to stop the machine.
NOTICE
If the brake pedal is depressed when the engine speed or machine travel speed is high, the brake disc may produce a slipping
sound. When depressing the brake pedal, usually depress decelerator pedal (2) to reduce the engine speed and machine travel
speed.
2. Place joystick (steering, directional, and gear shift lever) (3) at
the neutral position and set the speed range to 1st.
WARNING
OPERATION
3 - 141
Advertisement
Chapters
Table of Contents
