Traveling On Roads - Komatsu D475A-5E0 Operation & Maintenance Manual

TRANSPORTATION TRANSPORTATION
NOTICE
Use protectors to prevent the wire rope from being cut on sharp corners
and to prevent the wire rope from cutting into the machine bodywork.
When using a spreader bar, select an ample width to prevent contact
with the machine.
4. Install wire ropes, slings, etc. matched to the weight of the machine to the lifting points as shown in the diagram
on the right.
5. After setting the wire ropes, lift up the machine and stop at 100 to 200 mm (3.9 to 7.9 in) above the ground, and
check that the wire ropes are not slack and the machine is level, then lift up slowly.

TRAVELING ON ROADS

When traveling on paved roads, use flat shoes to protect their surface.
Even when travelling a short distance, always place boards to protect the road surface.
REMARK
Note that the asphalt road becomes soft in summer.
3 - 168
OPERATION OPERATION