Komatsu D475A-5E0 Operation & Maintenance Manual page 381

MINING SPECIFICATION MACHINE MINING SPECIFICATION MACHINE
2. Check that joystick (steering, directional, and gear shift lever)
(2) is in N (neutral) position.
STARTING WITH BOOSTER CABLES
WHEN USING EXTERNAL POWER SOURCE CONNECTOR FOR STARTING MOTOR
(based on SAE J1283)
There is an external power source connector for the starting motor
installed to this machine.
The connector of this type can be used to start the engine with a
booster cable.
The connector is inside the left fender switch box.
1. Connect the booster cable to the external power source
connector for the starting motor of the problem machine.
2. Connect the other end of this cable to the external power
source connector for the starting motor of the normal machine.
6 - 42
ATTACHMENTS, OPTIONS ATTACHMENTS, OPTIONS