Komatsu D475A-5E0 Operation & Maintenance Manual page 129

EXPLANATION OF COMPONENTS
Stopping Manual Operation
Press OFF switch (1). The displays for temperature setting (a) and
air flow (b) on monitor (7), and lamps above auto switch (5) and air
conditioner switch (8) go out, the operation stops.
Operation with Cold Air to Face and Warm Air to Feet
To operate with cold air blowing to the face and warm air blowing
to the feet, set as follows.
1. Press fan switch (2) and adjust the air flow. When doing this,
check that temperature setting (a) and air flow (b) are displayed
on the monitor.
2. Press vent selector switch (4) and set the vent display on the
display monitor to the display shown in the figure on the right.
3 - 76
OPERATION