Method Of Lifting Machine - Komatsu D475A-5E0 Operation & Maintenance Manual

OPERATION

METHOD OF LIFTING MACHINE

The operator performing the lifting operation by using a crane must be a properly qualified crane operator.
Never raise the machine with any worker on it.
Always make sure that the wire rope is of ample strength for the weight of this machine.
When lifting, keep the machine horizontal.
When performing lifting operations, set the work equipment lock lever and parking brake lever to LOCK position to prevent the
machine from moving unexpectedly.
Never enter the area under or around a raised machine.
Never try to lift the machine in any posture other than the posture given in the procedure below or using lifting equipment other
than in the procedure below.
There is a hazard that the machine may lose its balance.
NOTICE
This method of lifting applies to the standard specification machine.
The method of lifting differs according to the attachments and options installed.
For details of the procedure for machines that are not the standard specification, consult your Komatsu distributor.
When lifting the machine, stop it on a level place, then observe the following procedure.
1. Set the work equipment lock lever to LOCK position (L)
securely.
2. Set the parking brake lever to LOCK position (L) securely.
3. Stop the engine.
WARNING
TRANSPORTATION
3 - 167