Table of Contents
Advertisement
ATTACHMENTS, OPTIONS
REVERSE SLOW MODE
This reduces the travel speed when traveling in reverse, reduces
the frequency of operating the decelerator pedal, and improves the
riding comfort for the operator.
Speed ranges that can be used: R1, 2, 3
(If this mode is only necessary when traveling in R2 or R3, it is
possible to change the setting of the service mode. To do this,
contact your Komatsu distributor.)
Applicable operations: Traveling on bedrock, traveling down
Use this mode to reduce the travel speed when traveling in R1, R2,
or R3.
When the reverse slow mode is ON, the travel speed is set to
approximately 80% of the full travel speed.
Use this mode to reduce the travel speed when traveling in reverse after ripping and dozing bedrock or when
traveling in reverse after dozing on steep slopes. The travel speed differs in each mode according to whether it is
used in combination with the economy mode or with shoe slip control.
When using shoe slip control, the travel speed for bedrock setting
modes [1] to [5] is set at approximately 70 to 90% of the full travel
speed.
When traveling on bedrock, if it is felt that the travel speed when
traveling in reverse is too high, turn the reverse slow mode ON.
This will reduce the travel speed when traveling in reverse.
When traveling down slopes, if it is felt that the travel speed when
traveling in reverse is too high, turn the reverse slow mode ON.
This will reduce the travel speed when traveling in reverse.
steep hills
SHOE SLIP CONTROL
6 - 25
Advertisement
Chapters
Table of Contents
