Moving Machine - Komatsu D475A-5E0 Operation & Maintenance Manual

OPERATION

MOVING MACHINE

Before moving the machine, check that the area around the machine is
safe, and always sound the horn before moving.
Do not allow anyone to enter the area around the machine.
The rear of the machine is a blind spot, so be extremely careful when
traveling in reverse.
When moving the machine down a slope, always keep brake pedal (8)
depressed, even after releasing parking brake lever (1).
When moving the machine up a steep slope, turn fuel control dial (5) to
High idle (MAX) position and run the engine at full speed, and keep
brake pedal (8) and decelerator pedal (6) depressed. Then operate
joystick (steering, directional and gear shift lever) (7) from N (neutral)
position to the direction of travel and slowly release brake pedal (8).
When the travel speed rises, slowly release decelerator pedal (6).
1. Operate parking brake lever (1) to FREE (F) position.
2. Operate work equipment lock lever (2) to FREE (F) position.
3 - 126
WARNING
OPERATION