Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
BATTERY DISCONNECT SWITCH
(if equipped)
If the battery disconnect switch is turned to OFF position, always remove the switch key.
If someone turns the key to ON position carelessly, this is extremely dangerous.
NOTICE
Keep this switch in ON position, except the following cases.
When the machine is stored for a long time (more than a month)
When the electrical system is repaired
When an electrical welding is conducted
When the battery is handled
When the fuse is replaced
If this switch is turned to OFF position, all the electrical system is cut out and these functions are stop. In addition, the time
information of the clock and the radio station select information may be lost. In this case, see "CAR STEREO, HANDLING (PAGE
3-58)" and "TIME/RADIO DISPLAY SELECTOR BUTTON (PAGE 3-60)" and set again.
Use switch (1) to cut out the electricity from the battery.
This switch is installed in the battery box on the right side of the
machine.
(O) : OFF position
Switch key (1) can be pulled out (and inserted) and the current from
the battery is cut out.
(I) : ON position
The current from the battery flows into the circuit.
Before starting the machine, be sure to set the switch to this
position.
3 - 84
CAUTION
OPERATION
Advertisement
Chapters
Table of Contents
