Edid Menu; Edid Memory Structure; Edid Operations - Lightware HDMI-TPS-TX210 User Manual

   
5.SoftwareControl-LightwareDeviceController
5.8. EDID Menu
AdvancedEDIDManagementcanbeaccessedbyselectingtheEDIDmenu.Therearetwopanels:leftone
containsSourceEDIDs,rightonecontainsDestinationplaceswheretheEDIDscanbeemulatedorcopied.
5.8.1. EDID Memory Structure
TheEDIDmemoryconsistsoffourparts:
Factory EDID list (F1-F#)showsthepre-programmedEDIDs.
▪
Dynamic EDID list (D1-D#) shows the EDIDs of the display devices connected to the output ports. The
▪
device stores the EDID of the sink connected to each output port for the last time, thus, there is an
EDID shown even if there is no display device attached to the output port at that moment.
User memory locations (U1–U#) can be used to save custom EDIDs. Any EDID from any of the User/
▪
Factory/DecoderEDIDlistscanbecopiedtotheusermemory.
▪ Emulated EDID (E1-E#)showsthecurrentlyemulatedEDIDonthegiveninputport.Thesourcecolumn
displays the memory location where the current EDID is routed from.

EDID menu

#edid
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
5.8.2. EDID Operations
Changing Emulated EDID
Step 1. Choose the desired EDID list on the source panel and select an EDID.
Step 2. PresstheEmulated button on the top of the Destination panel.
Step 3. Selectthedesiredportontherightpanel(oneormoreportscanbeselected);theEDID(s)willbe
highlightedwithayellowcursor.
Step 4. PresstheTransferbuttontochangetheemulatedEDID.
Learning an EDID
TheprocessisthesameaschangingtheemulatedEDID;theonlydifferenceistheDestinationpanel:press
the User button. Thus, one or more EDIDs can be copied into the user memory either from the factory memory
or from a connected sink (Dynamic).
Exporting an EDID
SourceEDIDcanbedownloadedasafile(*.bin,*.dator*.edid)tothecomputer.
Step 1. SelectthedesiredEDIDfromtheSourcepanel(linewillbehighlightedwithyellow).
Step 2. PresstheExportbuttontoopenthedialogboxandsavethefiletothecomputer.
Importing an EDID
PreviouslysavedEDID(*.bin,*.dator*.edidfile)canbeuploadedtotheusermemory:
Step 1. PresstheUserbuttononthetopoftheSourcepanelandselectamemory slot.
Step 2. PresstheImportbuttonbelowtheSourcepanel.
Step 3. BrowsethefileintheopeningwindowthenpresstheOpen button. Browsed EDID is imported into the
selectedUsermemory.

ATTENTION! The imported EDID overwrites the selected memory place even if it is not empty.
Deleting EDID(s)
TheEDID(s)fromUsermemorycanbedeletedasfollows:
Step 1. PressUser button on the top of the Destination panel.
Step 2. Selectthedesiredmemoryslot(s);oneormorecanbeselected(Select All and
Select Nonebuttonscanbeused).TheEDID(s)willbehighlightedwithyellow.
Step 3. PresstheDelete selected button to delete the EDID(s).
40