Recognizer; Enable The Recognizer; Setting The Delimiter Hex - Lightware HDMI-TPS-TX210 User Manual

   
7.LW3Programmer'sReference
7.10.4.2. Sending a CEC Command in Text Format

ATTENTION! The have a successful command processing, the connected device must support and
accept CEC commands.
Command and Response
 CALL·/MEDIA/CEC/<port>:send(<command>)
 mO·/MEDIA/CEC/<port>:send
Parameters
Thefollowingsareacceptedas<command>:
image_view_on standby
down left
contents_menu favorite_menu
number_1 number_2
number_6 number_7
enter clear
input_select display_info
volume_up volume_down
play stop
fast_forward eject
stop_record pause_record
select_media_1 select_media_2
power_toggle power_on
f2 f3
Example
 CALL/MEDIA/CEC/I2:send(power_on)
 mO/MEDIA/CEC/I2:send
7.10.4.3. Sending a CEC Command in Hexadecimal Format
 CALL·/MEDIA/CEC/<port>:sendHex(<hex_code>)
 mO·/MEDIA/CEC/<port>:sendHex
Parameters
The <hex_code>parametercanbemax.30characterlong(15byte)inhexadecimalformat.
Example
 CALL/MEDIA/CEC/I2:sendHex(8700E091)
 mO/MEDIA/CEC/I2:sendHex
ok back up
right root_menu setup_menu
media_top_menu media_context_menu number_0
number_3 number_4 number_5
number_8 number_9 dot
channel_up channel_down sound_select
power_legacy page_up page_down
mute_toggle mute unmute
pause record rewind
skip_forward skip_backward 3d_mode
play_forward play_reverse select_next_media
select_media_3 select_media_4 select_media_5
power_off stop_function f1
f4
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
7.11. RS-232 Recognizer
ThistoolisabletorecognizetheincomingRS-232message.Itstorestheincomingserialdatafromthefirst
bit,untilthepreviouslydefinedstring(delimiter)ortheelapsingtimeoutafterthelastbit.Thelastincoming
serialstringissavedindifferentformats(string,hex,andhash).
7.11.1. Enable the Recognizer
SET·/MEDIA/UART/<port>.RecognizerEnable=<rec_state>

pw·/MEDIA/UART/<port>.RecognizerEnable=<rec_state>

Parameters

#recognizer

If the <rec_state> parameter is true or
therecognizerisdisabled.
Example
 SET/MEDIA/UART/P1.RecognizerEnable=true
 pw/MEDIA/UART/P1.RecognizerEnable=true
7.11.2. Setting the Delimiter Hex
Whenthedelimiterhexstringisdetectedintheincomingserialdata,thedevicesavestheRS-232message
datafromthefirstbit,untilthedelimiter(orthedatabetweenthetwodelimiter).
SET·/MEDIA/UART/RECOGNIZER.DelimiterHex=<delimiter>

pw·/MEDIA/UART/RECOGNIZER.DelimiterHex=<delimiter>

Parameters
<delimiter>canbemax.8characterlong(or16hexdigit)inhex format.
Example
 SET/MEDIA/UART/RECOGNIZER.DelimiterHex=3a
 pw/MEDIA/UART/RECOGNIZER.DelimiterHex=3a
#rs-232recognizer #rs232recognizer
1therecognizerisenabled.Ifthe<rec_state>
Delimiter (hex format: 3A)
... Password : Login name : ...
Stored string
88
parameter is false or 0,