Lightware HDMI-TPS-TX210 User Manual page 101

   
8.FirmwareUpgrade
Step 1. Select the Firmware Package.
Click on the Select Firmware Package button and navigate to the
location where the LFP2 file was saved. When you click on the
nameofpackage,thepreviewofthereleasenotesaredisplayedintherightpanel.
Afterthepackagefileisloaded,thelistisfilteredtoshowthecompatibledevicesonly.Thecurrentfirmware
versionofthedeviceishighlightedinorangeifitisdifferentfromtheversionofthepackageloaded.

INFO: Ifyoustarttheupgradebydouble-clickingontheLFPfile,abovescreenwillbeloadedrightaway.
HDMI-TPS-TX200series–User'sManual
SELECT FIRMWARE PACKAGE
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
The Meaning of the Symbols
Show Thelogabouttheupgradingprocessofthedevice

details can be displayed in a new window.
Service The device is in bootload mode. Backup and restore
mode cannot be performed in this case.
Step 2. Select the desired devices for upgrading.
Selectthedevicesforupgrading;theselectedlinewillbehighlightedingreen.
If you are not sure which device to select, press the Identify me
for10seconds.Thefeaturehelpstofindthedevicephysically.
Step 3. Check the upgrade parameters.
DIFFERENCE:
Theappearingsettingsaredevice-dependentandcanbedifferentdevicebydevice.
ClickingontheParametersbutton,specialsettingswillbeavailablelike:
▪ Creatingabackupabouttheconfiguration,
Restoretheconfigurationorreloadingthefactorydefaultsettingsafterthefirmwareupgrade,
▪
UploadingthedefaultMiniweb(ifavailable).
▪
Pleasearrangethesettingscarefully.
101
button.ItmakesthefrontpanelLEDsblink

PARAMETERS
#miniweb #web