5.SoftwareControl-LightwareDeviceController
5.9.2. GPIO
TheGPIOporthas7pins,whichoperateatTTLdigitalsignallevelsandcanbecontrolledbyLDCorprotocol
commands.SelectaGPIOpinandunderthePortsettingssection;thesettings(pindirectionandinputlevel)
are displayed on the port tiles as well.
1
GPIO 1
2
3
4
*Theblack-highlightedsymbolmeansthecurrentsetting.
INFO:
OutputlevelcanbesetonlyincaseofsettingthepindirectiontoOutput.Incaseofinputdirection
theoutputlevelsettingandtheTogglebuttonisnotavailable.
FormoredetailsaboutGPIOinterfaceseetheGPIOInterface
6
1
P1
GPIOpinname
2
GPIOporticon
5
3
Lowlevelindicator*
4
Highlevelindicator*
5
Pindirection:
Input:downarrow
Output:uparrow
6
GPIOportnumber
section.
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
5.9.3. Ethernet
Two ports are displayed in the Ethernet settings: Local, CPU, and TPS. You can check the status of the
Ethernetlinebyeachports:thespeedandtheduplexityoftheconnection.
Thefollowingsettingsareavailableforthelocalport:
▪
Enable/disabletheport;
Reloadingfactorydefaults.
▪
ATTENTION!
SettingtheEthernetportdisabled may break the connection with the device.
INFO:
CPUEthernetportcannotbedisabled.
44