Infra - Lightware HDMI-TPS-TX210 User Manual

   
5.SoftwareControl-LightwareDeviceController
5.9.4. Infra

ATTENTION! Thedevicehasnobuilt-inInfraredreceiverandtransmitter.Forthecompleteusageattach
anIRemitterunittotheIROUTandanIRdetectorunittotheIRINconnectors.
Infra-Red (IR) receiver and transmitter options can be found on this tab. There are three submenus are
availableunderit:IR codes, Ports, and Clear all IR codes.
#infra #infrared
HDMI-TPS-TX200series–User'sManual
IR Codes
TheusercansetthenameoftheIRcode,thefingerprint(hash),andtherepeattimeoutinms,actionscan
beorderedtoeachIRcodeaswell.
Description
ID
Name
Fingerprint (hash)
Detected
Repeat timeout (ms)
Actions
Detected IR fingerprints
20fingerprintscanbestoredinthedeviceatthesametime.Eachofthemcanbeorderedtoaconditionin
EventManager.
Storing the Fingerprint of an IR Code
Step 1. ConnecttheIRdetectorunittotheIRINportofthetransmitter.
Step 2. Click on the Learn button.
Step 3. TurntheremotecontrollertotheIRdetector.Apop-upwindowappearsinLDC-pressyourremote
Step 4. Oncethecodeisreceived,anewwindowpopsupinLDC-learningcompleted.ClickOK to continue.
Step 5. Optionally type a unique name for the code in the Nametextbox.Thedefaultnameiscode#,e.g.
Ports
User can set the name and command injection port to each sources and destinations. For more details
aboutIRinterfaceseetheInfrared Interface
Clear all IR codes
ClickingonthebuttonresultsdeletingallstoredIRfingerprints.
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
Function
Code number.
Youcangiveanuniquenameforthedesiredcode.
Fingerprintcodeinprontohexaformat.
IndicatorgivesfeedbackaboutthegivenIRcodeisdetectedcurrently.
You can set a timeout to avoid the involuntary code recurrence.
ActionbuttonsforthedesiredIRcode:
Save:savingthefingerprint.
Cancel:cancelingthefingerprint.
Learn:learningthedetectedIRcode.
YoucancheckthedetectedIRcodesinthispanel.PushingClear button
deletingallcurrentfingerprintsandswitchonorofftheautomaticscrolling
with the Autoscroll pipe.
button to learn.
code0.
section.
45