Event Manager - Lightware HDMI-TPS-TX210 User Manual

   
5.SoftwareControl-LightwareDeviceController HDMI-TPS-TX200series–User'sManual 46
5.10. Event Manager
The feature means that the device can sense changes on its ports and able to
react according to the pre-defined settings. The development idea of the Event
manager is based on users' feedbacks. In many cases internal events (such as
signalpresentorHDCPactive)arenecessarytodisplaybutitisnoteasywhenthe
deviceishardtoaccess(e.g.builtunderthedesk).
TheEventmanagercanbeconfiguredtoperformanactionifaconditionhasbeendetected.E.g.thedesired
setupisthatafteracertaintypeofsignalhasbeendetectedonI1port,theporthastobeswitchedtoO1.
ThesettingscanbedoneviatheLDCintheControl/Eventstab,orbyLW3protocolcommands.Configurable
eventsnumberdependsonthedevicewhatyouareusingactually.
Numerousnewideasandrequestshavebeenreceivedinconnectionwiththefeaturesandsettingsofthe
Eventmanagersincethefirstrelease.Therefore,theuserinterfacehasbeenre-designedandmanynew
functionsimplemented.TheEventeditorcanbeopenedbypressingtheEdit button at each Event.
There is a grey bar on the left of the Event panel in each line. If a condition and an action are set and the Event
is enabled, the bar is displayed in green.
#eventmanager
Control menu, Event Manager tab
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0