The Upgrading Steps - Lightware HDMI-TPS-TX210 User Manual

   
8.FirmwareUpgrade
Device List
Whenthediscoveryhascompleted,thedevicesavailableonthenetworkarelistedintheapplication.
Legend of the Icons
IP address editor TheIPaddressofthedevicecanbechangedinthepop-upwindow.

Identify me ClickingontheiconresultsthefrontpanelLEDsblinkfor10seconds

which helps to identify the device phisically.
Favorite device Thedevicehasbeenmarked,thustheIPaddressisstored.Whenadeviceis
 
connectedwiththatIPaddress,thestarwillhighlightedinthatline.
Further information Deviceisunreachable.ChangetheIPaddressusingthe

available frontpanelLCDmenuortheIPaddresseditoroftheLDU2.
HDMI-TPS-TX200series–User'sManual
8.4. The Upgrading Steps

ATTENTION!
deviceisswitchedtobootloadmode.Signalprocessingisnotperformed.Donotinterruptthefirmware
upgrade.Ifanyproblemoccurs,reboottheunitandrestarttheprocess.
Keeping the Configuration Settings
Bydefault,deviceconfigurationsettingsarerestoredwhenfirmwareupgradeisfinished.Iffactoryresethas
beenchosenintheparameterswindow,alldevicesettingswillbeerased.Inthecaseoffactoryreset,you
cansavethesettingsofthedeviceintheLightwareDeviceControllersoftwareandrestoreitlater.
Thefollowingflowchartdemonstrateshowthisfunctionworksinthebackground.
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
While the firmware is being upgraded, the normal operation mode is suspended as the
1. Create a backup
Thecurrentconfigurationofthedeviceisbeingsavedintoaconfigurationbackupfileonyour
computer.
2. Start the Upgrade
Thedevicerebootsandstartsinbootloadmode(firmwareupgrademode).
3. Upgrade
TheCPUfirmwareischangedtothenewone.
4. Factory reset
Allconfigurationsettingsarerestoredtothefactorydefaultvalues.
5. Conversion / Restore
The firmware package checks the backup data before the restore procedure, and if it is
necessary, a conversion is applied to avoid incompatibility problems between the firmware
versions.Allconfigurationsettingsarerestoredtothedeviceaftertheconversion.
If the factory default option is selected in the Parameters window, the conversion / restore procedure will
not be performed!
6. Finish
Oncethefirmwareupgradeprocedureisfinished,thedevicerebootsandisreadytouse.
100