Network Configuration; Querying The Ip Address - Lightware HDMI-TPS-TX210 User Manual

   
7.LW3Programmer'sReference
7.6.17.4. Setting the Volume (in Percentage)
Command and Response
SET·/MEDIA/AUDIO/<in>.VolumePercent=<vol_percent>

pw·/MEDIA/AUDIO/<in>.VolumePercent=<vol_percent>

Parameters
The input volume <vol_percent>(attenuation)canbesetbetween0and100%instepof0.01%.Thevalueis
rounded up if necessary to match with the step value.
Example
 SET/MEDIA/AUDIO/I5.VolumePercent=20
 pw/MEDIA/AUDIO/I5.VolumePercent=20.00
TIPSANDTRICKS:
ThevolumecanbealsosetbyasteppercentvaluecallingthestepVolumePercent method.
7.6.17.5. Querying the Balance
Command and Response
 GET·/MEDIA/AUDIO/<in>.Balance
pw·/MEDIA/AUDIO/<in>.Balance=<level>

Parameters
The input balance <level>canbesetbetween-100(left)and100(right).Centeris0(default).
Example
 GET/MEDIA/AUDIO/I5.Balance
 pw/MEDIA/AUDIO/I5.Balance=
7.6.17.6. Setting the Balance
Command and Response
SET·/MEDIA/AUDIO/<in>.Balance=<level>

pw·/MEDIA/AUDIO/<in>.Balance=<level>

Parameters
Seetheprevioussection.
Example
 SET/MEDIA/AUDIO/I5.Balance=25
 pw/MEDIA/AUDIO/I5.Balance=25
HDMI-TPS-TX200series–User'sManual
7.6.17.7. Querying the Gain Level
Command and Response
 GET·/MEDIA/AUDIO/<in>.Gain
pw·/MEDIA/AUDIO/<in>.Gain=<level>

Parameters
Theinputgain<level>canbesetbetween-12and35.25dB;defaultvalueis0.
Example
 GET/MEDIA/AUDIO/I5.Gain
 pw/MEDIA/AUDIO/I5.Gain=-5.00
7.6.17.8. Setting the Gain Level
Command and Response
SET·/MEDIA/AUDIO/<in>.Gain=<level>

pw·/MEDIA/AUDIO/<in>.Gain=<level>

Parameters
Seetheprevioussection.
Example
 SET/MEDIA/AUDIO/I5.Gain=15
 pw/MEDIA/AUDIO/I5.Gain=15.00
7.7. Network Configuration
7.7.1. Querying the IP Address
Command and Response
 GET·/MANAGEMENT/NETWORK.IpAdress
pr·/MANAGEMENT/NETWORK.IpAddress=<IP_address>

Example
 GET/MANAGEMENT/NETWORK.IpAddress
 pr/MANAGEMENT/NETWORK.IpAddress=192.168.0.100
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
81