Lightware HDMI-TPS-TX210 User Manual page 105

   
9.Troubleshooting
Symptom Root cause
IncorrectIPaddressis
No LAN
set(fixIP)
connection can be
established
IPaddressconflict
Connected device Cable connection
does not respond problem
The direction of the
Output level selected pin is set to
cannot be changed input
Front panel Buttons are locked
buttons are out of
operation
Error messages Different protocol is set
received
continuously
Firmwarepackage
difference
Action Refer to
Network
UsedynamicIPaddressbyenabling
DHCPoption.
LW3
Restorethefactorydefaultsettings
(withfixIP).
LW2
LW3
ChecktheIPaddressoftheother
devices, too.
GPIO
Check the connectors to fit well; check
thewiringoftheplugs.
Check and modify the direction setting
of the desired pin
LW2
LW3
Miscellaneous
Unlockthebuttons
Check the port protocol settings (LW2
/ LW3) and use the proper protocol
LW3
commands.
The firmware of the device and the
command description in the User's
manualarebasedondifferentfirmware
packageversion.Checktheversionsand
upgradeifnecessary.
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
2.5.4
5.11.2
7.7.3
2.5.5
5.11.5
6.3.11
7.4.6
3.2.9
5.9.2
6.5.1
7.12
2.5.7
5.11.1
5.9.1
7.8.1
page3
5.11.1
105