Connecting Steps; Powering Options; Poe-Compatible Transmitters - Lightware HDMI-TPS-TX226 User Manual

   
3. Installation
3.3. Connecting Steps
CATx Connect the the transmitter and a compatible receiver or the matrix input board by a CATx cable
viatheTPSconnectors.
DVI ConnectthetransmitterandthesourcesusingtheinputsandDVI-I/HDMI/DisplayPortcables.
HDMI
DP
Audio Optionallyconnectanasymmetricaudiodevicewithunbalancedaudiosignal(e.g.aMP3
player)tothe2.5"TRS(Jack)audioinputport.
IR OptionallyforInfraredcontrol:
-ConnecttheIRemittertotheIROUTportofthedevice.
-ConnecttheIRdetectortotheIRINportofthedevice.
LAN
OptionallyconnectthetransmittertoaLANnetworkinordertocontrolthedevice.
RS-232 OptionallyforRS-232control:connectacontroller/controlleddevice(e.g.touchpanel)tothe
RS-232port.
GPIO Optionallyconnectacontroller/controlleddevice(e.g.relaybox)totheGPIOport.
Power
Seepoweringoptionsinthenextsection.
HDMI-TPS-TX200series–User'sManual
3.4. Powering Options
3.4.1. PoE-compatible Transmitters

DIFFERENCE:
and-TX220,DP-TPS-TX210and-TX220,SW4-TPS-TX240andTX240-Plus.HDMI-TPS-TX226containsa
differentkindofremotepoweringfeature,seethedetailsatthefollowingpage.
A
B
C

ATTENTION!
externalPSUtotheboard.Forthedetailedinformationpleasereadtheuser'smanualofthematrix.

ATTENTION!
INFO:

Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
Thissectionreferstothefollowingmodels:HDMI-TPS-TX210and-TX220,DVI-HDCP-TX210
Using local PSU:connectthesuppliedpoweradaptortotheDCinputonthetransmitterfirst,then
totheACpowersocket(oruseLightware'sPSU2x-seriespowersupplyunit).
Using PoE with connecting a transmitter:connecttheTPSOUT(PoE)portofthetransmittertothe
TPS+PoEportoftheTPS-PI-1P1powerinjectorbyaCATxcable,andconnecttheTPSinputportof
thecompatiblereceivertotheTPSportoftheTPS-PI-1P1byaCATxcable.
Using PoE with connecting a matrix or an input board:connecttheTPSOUT(PoE)portofthe
transmittertothePoE-compatibleTPSinputportofthematrixorinputboardbyaCATxcable.
In case of connecting the transmitter to an input board of the matrix always connect an
TheEthernetportdoesnotsupportPoE.OnlytheTPSportsupportPoEfunction.
If both remote and local power sources are connected, the remote power will be used.
23