Firmware Upgrading Steps - Lightware VINX-110-HDMI-DEC User Manual

   
6. Firmware Upgrade
6.4.1. Iirmware Upgrading Steps
Step 1. Get the necessary firmware pack (*.lfp or *.lfp2 file) and save it to
the control device (computer/mobile device).
Step 2. Establish the connection from the computer/mobile device to the
desired VINX extender as described in the
Built-in Web Page.
Step 3. Navigate to the Advanced Settings tab.
Step 4. Locate the Upgrade Firmware section and press the Choose file
button. Browse the firmware package file and press the OK.
Step 5. Press the Upgrade Firmware button. The firmware pack will be
uploaded into the device and the upgrade process is started
automatically.
Step 6. The progress bar and a short label will show the current state
of the process.
Step 7. When the programming is finished, the device will reboot and
the connection will be lost. Powering off and on again the
device is recommended.

INFO: LFP and LFP2 packages are also accepted for upgrading via
the built-in web.
Connecting via the
VINX-1x0-HDMI Extenders – User's Manual
Firmware Upgrade via the Built-in Web Page
59