Schematic Diagram Of Turbocharger System - Piper Navajo PA-31 Service Manual

8-32. INSTALLATION OF TURBOCHARGER. (Refer to the latest revision of Lycoming Service Instruc-
tions No. 1320.)
a. The exhaust plenum may be installed by the following procedure:
1. Slide the plenum on the right exhaust extension and secure it to the main mounting bracket.
If the turbo is in place, secure to the turbo.
2. Install the left exhaust extension on the plenum and connect to the exhaust stack. A gasket
is installed between the exhaust stack and its extension.
3. Secure the brackets that lead from the mounting bracket to the right and left exhaust
extensions.
8960
EXHAUST MANIFOLD
THROTTLE
PIPER NAVAJO SERVICE MANUAL
INDUCTION
MANIFOLD
OIL RETURN
TO ENGINE
DENSITY CONTROLLER RETURN
ENGINE
OIL INLET
ENGINE ENGINE
DIRECTION
AIR INLET
E OIL
DIFFERENTIAL
FLOW I
ENGINE OIL
INLET AIR
INDUCTION MANIFOLD PRESSURE
COMPRESSOR DISCHARGE PRESSURE
EXHAUST GAS DISCHARGE
EXHAUST GAS
Figure 8-7. Schematic Diagram of Turbocharger System
Revised: 9/24/81
POWER PLANT
217