Piper Navajo PA-31 Service Manual page 564

PIPER NAVAJO SERVICE MANUAL
8B-28. REMOVAL OF STARTING VIBRATOR.
a. Remove the left access panel to the nose section interior at station 70.0.
b. The starter vibrator is attached to the extreme left front side of the forward fuselage
bulkhead at station
c. Disconnect the electrical lead from the vibrator.
d. Remove the vibrator from the bulkhead by removing the attachment screws.
8B-29. INSTALLATION OF STARTING VIBRATOR.
a. Position the vibrator on the bulkhead and secure with screws.
b. Connect the electrical leads to the vibrator.
c. Check operation per paragraph 8B-27.
d. Install access panel.
8B-30. LUBRICATION SYSTEM. (Refer to Lubrication System, Section VIII.)
Reissued: 10/12/79
POWER PLANT
2L18