Piper Navajo PA-31 Service Manual page 58

SEE
PIPER NAVAJO SERVICE MANUAL
COMPONENT
1.
GEAR DOOR, OUTBOARD, HINGES AND CONTROL
RODS,
RIGHT AND LEFT
2. GEAR
OLEO STRUT FILLER, RIGHT AND LEFT (SEE
SPECIAL INSTRUCTION
4 AND CAUTION 1)
3. GEAR DOWNLOCK HOOK. CONTROL
ROD AND CABLE ENDS
AND BELLCRANK.
RIGHT AND LEFT
4 WHEEL BEARINGS, RIGHT AND LEFT
(SEE SPECIAL
INSTRUCTION
3 AND NOTE 2)
5 GEAR TORQUE LINK FITTINGS, RIGHT
AND LEFT
6. GEAR SIDE BRACE
LINK BUSHING AND HOUSING
BUSHING. RIGHT AND LEFT
7. GEAR
UPLOCK HOOK. CONTROL ROD AND CABLE ENDS
CYLINDER ENDS.
RIGHT AND LEFT
8. GEAR DOOR, INBOARD,
HINGES AND CYLINDER
ENDS,
RIGHT AND LEFT
9 BRAKE AND POWER PACK RESERVOIR
(SEE SPECIAL
INSTRUCTION
4 AND CAUTION 1)
10. GEAR UPLOCK ROD ASSEMBLY AND
DOWN LOCK ROD ASSEMBLY
SEE SPECIAL INSTRUCTION
8)
SEE NOTES 2 AND 3
II. PISTON STRUT. SEE NOTE 1
LUBRICANT
MIL-L-7870
MIL-H-5606
MIL-L-7870
MIL-G-3545
MIL-G-23827
MIL-G-23827
MIL-L-7870
MIL-L-7870
MIL-H-5606
MIL-G-3545
MIL-H-5606
FREQUENCY
100 HRS
AS REQUIRED
100 HRS
100 HRS
100 HRS
100 HRS
100 HRS
100 HRS
AS REQUIRED
50 HRS
WIPE EXPOSED STRUT WITH CLEAN CLOTH
AND HYDRAULIC FLUID MIL-H-5606
CLEAN AND LUBRICATE
WHENEVER
LANDING GEAR AND WHEEL AREA HAS
BEEN WASHED.
UPLOCK ROD USED ON AIRCRAFT MODELS
WITH S/N 31-5 TO 31-8212030 INCLUSIVE.
CABLE ASSEMBLY USED ON AIRCRAFT
MODELS WITH S/N 31-8212031 AND UP
Chart (Landing Gear, Main)
Figure 2-13. Lubrication
HANDLING AND SERVICING
Revised: 10/12/83
1C10