Piper Navajo PA-31 Service Manual page 202

1.
RIGHT BELLCRANK
2. TURNBUCKLE
3. AILERON CONTROL ROD
4. TRIM SCREW ASSY.
S. TRIM CONTROL ROD
. PULLY CLUSTER
7. PULLY CLUSTER
8. FAIRLEAD
9. TRIM CABLE
10. TURNBUCKLES
11. TRIM CABLE
12. TRIM SCREW ASSY.
11. RUB BLOCK
14. PULLEY
15. RIGHT CONTROL CABLE
16. RIGHT BALANCE CABLE
17. TURNBUCKLE
18. CABLE ENDS
19. RUB BLOCK
20. RIGHT INTERCONNECTING CABLE
21. LEFT INTERCONNECTING CABLE
22. LEFT CONTROL CABLE
24. LEFT BELLCRANK
25. CONTROL ROD
26. TURNBUCKLE
27. SPRING
28. SPRING
29. SPRING
30. CABLE
31. CONNECTOR
32. BOLT ASSEMBLY
33. SHAFT
34. LOCK NUT
35. CONNECTOR ROD
36. ARM
37. SENDER
38. BRACKET
39. GUARD BOLT
40. DRUM
41. HOUSING
42. CAP BOLT
43. SCREW STOP
44. SCREW
NOTE: BE SURE THE CABLE IS
ROUTED BETWEEN THE
CABLE GUARD AND THE
PULLEY.
SKETCH A
PIPER NAVAJO SERVICE MANUAL
47. CLEVIS
48. BOLT ASSY.
49. BRACKET
50. BRACKET
51. ROD END
52. JAM NUT
53. BOLT ASSY
54. TURNBUCKLE END
55. TURNBUCKLE END
56. BOLT ASSY
57. ROD END
58. JAM NUT
59. STOP BOLT
60. JAM NUT
61. STOP BLOCK
62. PIVOT BOLT
63. BOLTS ASSY.
64. CABLE GUARD
_
SKETCH C
SKETCH C
Figure 5-2. Aileron and Trim Controls
Interim Revision: 3/13/90
SURFACE CONTROLS
1110