Displayed Parameters
Adjusting Display Brightness
To adjust the brightness level of the display:
1. Press the >Screen Layout< key on the standard
screen (1 in
Figure
78). The screen layout
window appears (2 in
2. Turn the confirm knob to select the
>Brightness< option, and press the knob to
confirm. The brightness adjustment window
appears with the current brightness level
highlighted in yellow (1 in
3. Turn the confirm knob to adjust the brightness
level (from 1 to 16), and press the knob to
confirm.
Displayed Parameters
The following parameters are displayed on the
Apollo.
Note:
The specific parameters that are displayed
will vary, depending on the selected screen
and user configuration.
CO
Concentration
2
•
Curve display
•
Numerical display:
- etCO
(end-tidal CO
2
- FiCO
(fractional inspiratory CO
2
concentration)
•
Trend curve for CO
2
Note:
The CO
curve can be displayed in gray,
2
dark gray, red, yellow, blue, or green. This
setting can be configured by an authorized
DrägerService representative.
O
Concentration
2
•
Curve display
•
Numerical display:
- FiO
(fractional inspiratory O
2
- exO
(expiratory O
2
- ∆O
(difference between inspiratory and
2
expiratory O
2
•
Trend curve for O
2
Apollo Operator's Manual
Figure
78).
Figure
80).
concentration)
2
2
concentration)
2
concentration)
2
concentration)
Figure 80. Brightness Adjustment Window
Chapter 8 - Monitoring
1
111