Setting/Selecting Ventilation Parameters; Monitoring/Configuration Control Keys; Setting/Selecting Monitoring Functions - Dräger Apollo Operating Instructions Manual

Chapter 3 - User Interface

Setting/Selecting Ventilation Parameters

Example: setting PEEP
1. Press the soft key >PEEP<.
2. Rotate the confirm knob until the desired value is
displayed.
3. Push the confirm knob to confirm the new value.
If the new value is not confirmed within 15
seconds, it automatically reverts to the original
value.

Monitoring/Configuration Control Keys

The majority of monitoring and configuration
functions are performed using the vertical column of
soft keys along the right side of the screen (1 in
Figure 15). These keys have variable functions and
their labels change according to which monitoring
screen is selected (standard, data, or trend). An
arrow ( ) on the soft key label indicates that
pressing that key will bring up a second set of soft
keys with further user options.

Setting/Selecting Monitoring Functions

Example: change lower alarm limit for etCO
1. Press the soft key >Alarm Limits< (2 in
15). The alarm limits menu is displayed on the
screen.
2. Turn the confirm knob to select the low alarm
limit value for etCO
2
3. Push the confirm knob to confirm the selection.
4. Turn the confirm knob until the desired alarm
value is displayed.
5. Push the confirm knob to confirm the new alarm
limit value.
6. Exit the alarm limits menu by either:
• confirming the close symbol >
the confirm knob, or
• pressing the >
34
:
2
Figure
(see Figure 16).
z
< with
< key.
Figure 15. Location of Monitoring/Configuration Keys
Figure 16. Alarm Limits Menu
User Controls
2
1
Alarm Limits Menu
Apollo Operator's Manual