Ricoh IM 550 Series User Manual page 13

You can change the machine's settings to enter Low Power mode when you press the [Energy Save]
of [Energy Saver Key to Change Mode] under [Settings]
Tools].
See "Timer Settings", User Guide (Full Version).
To exit Low Power mode, do one of the following:
• Lift the ADF
• Place an original in the ADF
• Load paper in the bypass tray
• Touch the display panel
• Start Print Jobs
• Open any cover
• Open any paper tray
Sleep Mode
In this mode, the display of the control panel turns off and the main power indicator blinks slowly.
Power consumption is minimized. When you do not operate the machine for a specified period of
time or press [Energy Save] (
• You can specify the amount of time that the machine waits before entering Sleep mode under
[Sleep Mode Timer] or [Weekly Timer].
Under [Weekly Timer], you can specify the times and the days of the week that the machine
enters Sleep mode.
Only the administrator can specify [Weekly Timer] when administrator authentication is
enabled.
See "Timer Settings", User Guide (Full Version).
• The machine recovers from Sleep mode when you perform one of the following:
• Lift the ADF.
• Place an original in the ADF.
• Touch the display of the control panel.
• The energy saving functions are disabled when an error occurs or while an operation is in
progress.
), the machine enters Sleep mode.
Turning On and Off the Power
[System Settings] [Administrator
11