Table of Contents
Advertisement
5. Scan
4.
Press [Send Settings] and configure the scan settings according to the purpose of the
scanned data.
page 161 "Scanning an Original with Suitable Quality and Density"
page 164 "Specifying the File Type or File Name When Scanning a Document"
5.
Press , select [Search Address Book] or [Specify by Reg. No.] and then specify the
shared folder that is registered in the address book.
• To enter the information manually, press
protocol and enter the required information.
• To specify the destination again, press .
6.
Press [Start].
• If any of the machine's security functions are enabled, select the destination from the registered
folder only when you send files by [Scan to Folder].
• After scan files are sent, the destination and file name fields will be automatically cleared. If you
want to preserve the information in these fields, contact your local dealer.
160
DZC533
, and select [Manual Entry]. Select SMB as the
DZC536
Advertisement
Table of Contents
