Table of Contents
Advertisement
1. Getting Started
1
3.
Lift the machine using the inset grips on both sides of the machine in pairs.
Lifting the machine requires two people.
When moving the machine, do not touch the following parts:
• The operation panel, the ADF, and parts around them
• Convex parts on the right side of the machine
• Places indicated on the labels attached to the machine
• The bottom of the optional paper tray
4.
There are two upright pins on the optional paper feed unit. Align them with the holes on
the underside of the machine, and then carefully lower the machine.
5.
Plug in the power cord, and then turn on the machine.
6.
Print the configuration page to confirm that the unit was attached correctly.
• To check whether the optional paper feed unit was correctly attached, print the configuration page,
and check "Attached Equipment" on the configuration page. If the unit was attached correctly,
"Tray 2", "Tray 3", "Tray 4", and "Tray 5" will appear.
• See "List / Test Print", User Guide (Full Version).
24
2
EAT136
EAT137
Advertisement
Table of Contents
