Table of Contents
Advertisement
9. Troubleshooting
Message
"Paper size and type
are mismatched.
Select another tray
from the following
and press
[Continue]. To
cancel job, press
[Job Reset]. Paper
size and type can
also be changed in
User Tools."
"Parallel I/F board
has a problem."
"Printer font error."
"Print overrun."
"Receiving data
failed."
"Sending data
failed."
256
Cause
The paper tray
• To proceed with printing after changing the paper
loaded with paper
of the size or type
specified in the
printer driver is not
available.
• To proceed with printing on the specified paper,
An error has
Turn off the power of the machine, wait for 10 seconds
occurred in the
or more after confirming that the main power indicator is
parallel interface.
turned off, and then turn on the power.
page 9 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
There is a problem
Consider repairing the machine.
in the font file of the
machine.
A page image is
Decrease [Resolution] in the printer driver.
discarded while
See "Applying Different Print Settings Depending on the
printing the page.
Document Type", User Guide (Full Version).
Transmission of
Send the data again.
data was canceled.
Transmission of
Check that the computer is operating normally.
data from the
printer driver was
canceled.
Solution and reference
setting, select a tray and press [Continue]. When
Staple, Cover Sheet, Slip Sheet, Chaptering, or
Designate is specified, or when Duplex printing is
specified on a paper tray that does not support the
function, printing cannot be performed. When Sort
is specified, only one copy of the document is
printed.
load the paper and then check that the paper size
and type are correctly specified in [Settings]
[Tray Paper Settings].
page 181 "Loading Paper into the Paper Tray"
Advertisement
Table of Contents
