Do you have a question about the IM C6000 Series and is the answer not in the manual?
Questions and answers
Chelsea Baker
February 20, 2025
The printer updated and now I cannot figure out how to start a second copy job while one is in process. I used to be able to press new job and start my next set of copies while the first set was working. Now I **** stuck on this screen until the current job finishes.
1 comments:
Mr. Anderson
May 14, 2025
To start a second copy job on the Ricoh IM C6000 Series while the first job is still processing, press [New Job]. Simultaneous operation becomes possible after this action.
Page 1
Quick Reference Copy Guide Touch the Screen to Press the Copy Place originals in document feeder (face-up) or wake the device. icon on exposure glass (face-down) Press Start begin Select output & finishing Enter copy quantity copying. options as necessary. using the keypad.
Page 2
Quick Reference Copy Guide From the Home screen press the Copy icon TIP: Anything in yellow is selected A – Color Settings • Adjust color output settings B – Copy Ratio • Adjust Reduce/Enlarge settings C – Quantity • Adjust output quantity D –...
Need help?
Do you have a question about the IM C6000 Series and is the answer not in the manual?
Questions and answers
The printer updated and now I cannot figure out how to start a second copy job while one is in process. I used to be able to press new job and start my next set of copies while the first set was working. Now I **** stuck on this screen until the current job finishes.
To start a second copy job on the Ricoh IM C6000 Series while the first job is still processing, press [New Job]. Simultaneous operation becomes possible after this action.
This answer is automatically generated