1. Getting Started
4.
Unhook the two tabs on the outside of the interface cover.
5.
Insert the SD card into the slot until it clicks.
If you insert only one SD card, use the upper slot. If you insert two SD cards simultaneously, use
both slots. If you insert the optional VM card, use only the lower slot.
If you want to use two or more SD cards simultaneously, contact your service representative.
If you use a commercially available SD card for back up the address book, insert the SD card to
the lower slot.
6.
Hook the two tabs on the outside of the interface cover.
36
EAT230
EAT231
EAT232