Table of Contents
Advertisement
9. Troubleshooting
Messages that Appear with Error Codes
Check the system configuration list or print settings list. The details of the error may also be printed in the
list.
See "List / Test Print", User Guide (Full Version).
Message
"84: Error"
"86: Error"
"91: Error"
(displayed in the error
history)
"92: Error"
(displayed in the error
history)
"98: Error"
"99: Error"
"Command Error"
260
Cause
The amount of available
work area is insufficient for
processing images.
The parameter in the control
code is incorrect.
The auto job cancel function
was activated because an
unable-to-analyze-
command or illegal
command error occurred,
and printing was canceled.
Printing is canceled from the
control panel.
Accessing the hard disk
failed.
When printing a file from an
SD card or USB flash
memory device, the file to
print is in an unsupported
format or corrupt.
Communications with the
computer is temporarily
unstable.
Solution and reference
Reduce the transmission data.
Specify the correct parameter.
Check that the data is correct.
To perform printing, operate the control
panel again.
Turn off the power of the machine, wait for
10 seconds or more after confirming that
the main power indicator is turned off, and
then turn on the power.
page 9 "Turning On and Off the Power"
Check the data to print.
Consult your network administrator.
Advertisement
Table of Contents
