5.
Tighten the two screws to secure the interface board.
6.
Plug in the power cord, and then turn on the machine.
7.
Print the configuration page to confirm that the board was attached correctly.
• Check that the board was correctly installed by printing the configuration page. If it is correctly
installed, "Parallel Interface" will appear for "Device Connection" on the configuration page.
• See "List / Test Print", User Guide (Full Version).
• If the board was not installed properly, repeat the procedure from the beginning. If it cannot be
installed correctly even after trying the installation a second time, contact your sales or service
representative.
EAT225
Installing the IEEE 1284 Interface Board
29