Table of Contents
Advertisement
8. Adding Paper and Toner
Recommended Original Size and Weight
Original location
Exposure glass
*1
ADF
*1 About 100 originals can be loaded on the ADF. Specifications can vary depending on the type and
condition of the paper.
• An original whose size is within the range of the maximum original scan area can be placed.
• Place originals in the ADF if they are 356 mm (14.0 inches) along the feed direction. If you place
them on the exposure glass, the machine will scan only within the maximum scanning size.
• page 296 "Specifications for the Main Unit"
• On all sides of the original, there is a missing image area. Even if you place originals on the
exposure glass or in the ADF correctly, the missing image area on all four sides of the original
might not be copied.
• page 296 "Specifications for the Main Unit"
• You can place originals of two different sizes only in Mixed Sizes mode.
202
Original size
1
Up to A4 , 8
/
× 14
2
A4 –A6
1
1
1
8
/
× 14 –5
/
× 8
/
2
2
-
50–120 g/m
lb. Cover)
2
Original weight
2
(13–44
Advertisement
Table of Contents
