Ricoh IM 550 Series User Manual page 220

9. Troubleshooting
Sound pattern
Five long beeps
(repeating four times)
Five short beeps
(repeating five times)
12 short beeps
*1 The factory default sound pattern is used as an example in the table above.
• You cannot pause an alert sound that has started. The machine continues to emit the sound until the
preset sound pattern is completed.
• You can specify the volume and type of alert sound in [Settings]
[Sound]. The type of sound can be specified for each condition described in the table above. You
can also specify the volume of the sound emitted when using On-hook or Immediate Transmission
to send a fax in [Settings]
tab [Adjust Sound Volume]. Press [Home] (
• See "Setting the Sound Volume and Type", User Guide (Full Version).
218
*1
Condition
[Sound of Less Urgent Level]
[Sound of Urgent Level]
[Blank Page Detected]
[Machine Features Settings]
Check that an original is not left on
the exposure glass and that paper is
loaded in the paper tray.
Check the message displayed on the
screen, and resolve the problem such
as paper jam, toner exchange, or
others.
Check that the original is placed in
the ADF with the side to scan facing
up.
[Screen Features Settings]
[Fax Settings]
) after specifying the settings.
Solution
[General Settings]