Ricoh IM 550 Series User Manual page 80

2. Copy
When you set a 2-sided original in the ADF, the top right corner of the original will be the base
point for the enlargement/reduction of the reverse side. To enlarge or reduce from the same point,
set the original on the exposure glass and perform 2-sided copy.
3. Press [Copy Ratio] and select a copy ratio or size.
To specify a copy ratio or size other than the displayed setting, press [Others] and perform the
following procedure.
Specifying a copy ratio (Zoom/Reduce/Enlarge)
Enter a value or select the copy ratio.
Specifying a size (Size Magnification)
Press [Specify Copy Size] and enter the length of the original and copied image.
4. Press [Start].
• You can change the copy ratio options that appear when you press [Copy Ratio] on the Copy
screen. You can also change the enlargement and reduction ratios that appear when you press
[Copy Ratio]
78
[Others] on the Copy screen.
EAT411