Table of Contents
Advertisement
Message
"Load following
The paper tray
paper in XXX. To
specified in the
force print, select
printer driver has no
another tray and
paper loaded.
press [Continue]."
(XXX indicates the
tray name)
"Memory Overflow"
The insufficient
memory error has
occurred while
printing from the
printer driver (PCL
6).
"Memory Retrieval
The data in the
Error"
memory could not
be retrieved.
"No response from
In LDAP or
the server.
Windows
Authentication has
authentication, a
failed."
timeout error
occurred while
submitting an
authentication
query to the server.
"Output tray has
The destination to
been changed."
deliver the output
paper was changed
because of the
paper size limitation
of the output
destination.
When a Message Appears While Using the Printer Function
Cause
• To proceed with printing after changing the paper
setting, select a tray and press [Continue].
However, when Staple, Cover Sheet, Slip Sheet,
Chaptering, or Designate is specified, or when
Duplex printing is specified on a paper tray that
does not support the function, printing cannot be
performed. When Sort is specified, only one copy
of the document is printed.
• To proceed with printing on the specified paper,
load the paper in the tray.
page 181 "Loading Paper into the Paper Tray"
In the printer driver, change "Vector/Raster:" to [Raster]
in the [Detailed Settings] tab
Quality:Advanced] menu.
Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator is
turned off, and then turn on the power.
page 9 "Turning On and Off the Power"
Consult the administrator of the authentication server.
Specify the correct destination to deliver the output
paper.
Solution and reference
[Print
255
Advertisement
Table of Contents
