Table of Contents
Advertisement
8. Adding Paper and Toner
(mainly North America)
Mount the attachment to the end fence when loading 5
You can use this attachment in Tray 1 only.
4.
Load the new paper stack print side down.
Make sure paper is not stacked higher than the upper limit (upper line) marked inside the tray.
5.
Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively may cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
184
2
2
1
EAT327
1
EAT328
EAT073
1
/
× 8
/
size paper.
2
2
Advertisement
Table of Contents
