After Image Reinstallation: Driver Installation; Standard" Driver Installation Wes7, Win7Pro, Win10Iotent; Fig.10.2: Setup.exe For 64 Bit Operating System Win10Iotent - Advantech DLoG DLT-V72 Series User Manual

10.6.4. After image reinstallation: Driver installation

If the image has been reinstalled, the DLT-V72 must be set up again using the IGX WLAN
driver. Two drivers are available:
Driver for Win7Pro and WES7

Driver for Win10IoTEnt


10.6.5. "Standard" Driver installation WES7, Win7Pro, Win10IoTEnt

1. Open the corresponding installation directory depending on the OS.
2. Run Setup.exe to start the installation.
NOTE
DLT-V72 Series User Manual V2.70
The following installation example shows the Win10IoTEnt driver.
For Win 7 installation, please use the corresponding Win7 driver.

Fig.10.2: Setup.exe for 64 bit operating system Win10IoTEnt

90 / 173
WLAN Configuration