16.1. Regular maintenance work
16.1.1. General
To avoid damage to the DLT-V72 and to ensure safe functioning: Depending on the load
and environmental conditions, check at least once per month, and more often if
necessary, that all connected cables are secured and that the cable cover is tightly
sealed (important for IP protection against dust, etc.).
16.1.2. Cleaning the device
1. Switch off the DLT-V72 before cleaning.
2. Disconnect from the power supply.
3. Disconnect connected accessories.
4. Clean the touchscreen and housing with a damp cloth and a neutral glass-
5. Do not use any chemicals such as benzene, thinner or acidic/alkaline
6. Do not use any compressed air or high-pressure cleaning equipment.
16.1.3. Devices used in vehicles
DLT-V72 devices used in vehicles are subject to high loads due to vibration and shocks.
To ensure the secure fastening of the device to the vehicle, the following points must be
checked at least once a month, and where necessary more often, depending on the load
and environmental conditions:
1. Check that the DLT-V72 is securely positioned in the corresponding mount
2. Check that all fastening elements are correctly secured (e.g. screws, etc.).
3. Check that the mounting with the DLT-V72 is securely fastened to the
Risk of accident due to unstable attachment of DLT-V72
If the attachment of DLT-V72 becomes loose and breaks during moving, this can lead to
severe accidents. Perform checks for the attachment as described above at regular
intervals.
DLT-V72 Series User Manual V2.70
cleaning agent.
solutions for cleaning.
(e.g. in the RAM mount or in the mounting bracket).
vehicle.
159 / 173
Maintenance
Need help?
Do you have a question about the DLoG DLT-V72 Series and is the answer not in the manual?
Questions and answers