Table of Contents
Advertisement
1.3.8
Chassis Grounding Screw
To ensure the specified EMC performance, the iDAQ chassis must be connected to
the earth ground point through chassis grounding screw.
1.4
Driver Installation
The drivers for iDAQ chassis are included in drivers of iDAQ modules. You only need
to install the drivers for iDAQ modules via XNavi installer, so that the iDAQ modules
will be recognized by your system.
The driver package can be found on the Advantech Support Portal (https://
www.advantech.com/support). Search for iDAQ on the support portal, then the corre-
sponding driver/SDK package can be found. You'll get the XNavi installer after the
download session finishes.
Execute the installer, then it will guide you through the session. You can choose the
device and software components you'd like to install in the system (Figure 1.3). After
the selection, click on "start" to begin the installation.
Figure 1.3 XNavi Installer
5
iDAQ-934_964 User Manual
Advertisement
Table of Contents
