Related Manuals for Advantech DLT-V83 SERIES
Summary of Contents for Advantech DLT-V83 SERIES
- Page 1 Advantech-DLoG DLT-V83 Series ∕ Manual DLT-V83 Series Industrial PC Manual V1.50 www.advantech-dlog.com...
- Page 2 DLoG GmbH also assumes no liability for damages caused directly or indirectly by the delivery, performance or usage of this material. This documentation is protected by copyright. No reproduction, also in excerpts, is permitted without the prior written permission of the DLoG GmbH. Manual title: DLT-V83 Series Industrial PC Manual completed on: 08/28/2016 Manual PN: 20DLDOCX88530E00 Manual Version: V1.50...
-
Page 3: Table Of Contents
Table of contents 6.6. WWAN, internal GPS (optional) ..........33 1. IMPORTANT INFORMATION ABOUT THE DLT-V83 6.6.1. Safety information about radio wave emissions ........33 MANUALS .................... 5 6.6.2. Mini SIM card for WWAN operation ............. 34 1.1. Available manuals (in printed form or on the Internet) ... 5 6.6.3. - Page 4 15.13. Network interface ..............98 11. INTEGRATED UPS (OPTIONAL) ..........73 15.14. Audio interface for handset ............. 98 11.1. Battery pack specification, UPS ..........74 15.15. Internal speaker, sound ............99 11.2. Charging the integrated UPS correctly ........74 15.16. Integrated UPS (optional) ............99 11.3.
-
Page 5: Important Information About The Dlt-V83 Manuals
Please contact DLoG GmbH if you require additional information or clarification. You can find the contact address in section Technical customer support. Current manual versions The latest versions of our manuals are available at our website: www.advantech-dlog.com -> Download -> Products Advantech-DLoG DLT-V83 Series Manual V1.50 Page 5 of 122... -
Page 6: Design Elements In The Manual
Information about possible physical damage. Tips for handling product and manual Tips for handling product and manual are shown as follows: Tips for using the product. Note about additional information in manuals. Page 6 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 7: One Manual For All Device Models
Important information about the DLT-V83 manuals 1.3. ONE manual for all device models This manual applies to all models of the DLT-V83 series: − DLT-V8310 (with 10" display) − DLT-V8312 (with 12" display) − DLT-V8315 (with 15" display) − Device model with resistive touchscreen −... -
Page 8: Observe The Safety Instructions
− Training or instruction in how to maintain and use appropriate safety equipment in accordance with the current standards for safety equipment. − Training in first aid. Users of the DLT-V83 must be trained by skilled personnel and instructed about the operation of the device. Page 8 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 9: Functional Description
− The compliance with the approved environmental conditions and specifications for the device. Accessories Only use accessories that have been tested and approved by Advantech-DLoG for the respective DLT-V83. Otherwise, any DLoG GmbH warranty for this device will be void. -
Page 10: Mount, Operate And Service The Device Correctly
Find details on the Advantech-DLoG Internet homepage www.advantech-dlog.com. LCD display The LCD display of the DLT-V83 series fulfills the highest quality standards and was inspected for pixel defects. However, due to technological reasons pixel defects can occur. This is not a malfunction; it is a part of the technical specifications. -
Page 11: Device Identification / Name Plate
Or: AC devices: Input voltage of the AC power supply unit with max. nominal current (100-240 VAC with 1 A max.). S/N ..Serial number: Specific Advantech-DLoG device code Week and year of manufacture Barcode For Advantech-DLoG internal use only Advantech-DLoG DLT-V83 Series Manual V1.50... -
Page 12: Unpacking, Transporting, Storing The Device
Repackage the device using suitable packaging material to ensure that the device is not damaged during transport. For devices with integrated UPS/battery packs, comply with the transport conditions for battery packs. Use the required package labels and accompanying documents. Page 12 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 13: Storage
Place devices front-to-front in this case. The VESA mounting point on the rear side of the device can damage the touchscreen of another device. Use protective material (non-flammable!) between the devices as a precaution. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 13 of 122... -
Page 14: Operating The Device
Only use the DLT-V83 within the permitted temperature and humidity range. Do not subject it to strong impacts and vibrations that exceed what is specified by the class 5M3/5M2 (DIN EN 60721-3-5). Page 14 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... - Page 15 If vehicles on which DLT-V83 devices with a Screen-Defroster and an integrated UPS are installed are parked or stored for a significant length of time, disconnect the DLT-V83 from the vehicle battery. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 15 of 122...
-
Page 16: Switching The Dlt-V83 On/Off
(abbreviated PCT). TIP: Protective film for resistive touchscreens Optional protective film is available for the resistive touchscreens. Details in section 12.19 Protective film for touchscreen (optional). Page 16 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 17: Prevent Damage To The Touchscreen
(WES 2009) Microsoft Windows 7 Professional Microsoft Windows Embedded Standard 7 (WES7) No - license-dependent Microsoft Windows Embedded 8.1 Industry Pro Microsoft Windows Embedded 8 Standard (WE8S) Advantech-DLoG Linux-Image, based on Debian Advantech-DLoG DLT-V83 Series Manual V1.50 Page 17 of 122... -
Page 18: Dlt-V83 Front Keys With Resistive Touchscreen
- Touch on, off S1, S2 - Esc - Enter LEDs: - Temperature - Flash drive - Supply voltage Front keys: Shift, function keys F1 to F12 Numbers 0 bis 9, point, backspace Page 18 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 19: Device With 26 Front Keys
<Shift> key; if the LED is illuminated, it indicates that the <Shift> is activated Explanation LED (red): Indicates a device temperature outside the normal range. LED (green): Indicates access to the flash drive. LED (green): Display of available internal supply voltage. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 19 of 122... - Page 20 <Shift> not pressed: Key function marked in white is active. … The function keys are configured with the "DLoG Config" program, the associated manual is available in the Download Center at www.advantech-dlog.com. Page 20 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG...
-
Page 21: Device With 5 Front Keys
LED off: Touchscreen activated Explanation LED (red): Indicates a device temperature outside the normal range LED (green): Indicates access to the flash drive LED (green): Display of available internal supply voltage Advantech-DLoG DLT-V83 Series Manual V1.50 Page 21 of 122... -
Page 22: Operating States
Computer will only start if the temperature in the device is in the range between -30 and +62 °C again. Computer start-up/normal operational state/shutdown delay time. Temperature < -30 or > +70 °C. FLASHING Temperature sensor malfunctioning. Page 22 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 23: Dlt-V83 Front Keys With Pct Touchscreen
To do this, press and hold the button for 2 seconds After the device has been switched off, it can only be switched on again after 10 seconds. Manual brightness control: Display brighter Manual brightness control: Display darker Advantech-DLoG DLT-V83 Series Manual V1.50 Page 23 of 122... -
Page 24: Operating States
Indicates a temperature in the device that is below or above the normal range. Computer will only start if the temperature in the device is in the range between -30 and +62 °C again. Page 24 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 25: Software Keyboard (Optional)
Fig. 5.4: Software keyboard example If the software keyboard was ordered together with the DLT-V83 industrial PC, then the program will have been fully pre-licensed by the Advantech-DLoG production department. For subsequent installation, an installation program is available. The manual for the A-DLoG software keyboard is available in the Download Center at www.advantech-dlog.com. -
Page 26: Configuration
6.2. Linux OS (optional) The configuration of the DLT-V83 with Linux with regard to wireless networks, touchscreen calibration, etc. is described in a separate Advantech-DLoG Linux manual. The Advantech-DLoG Linux manual is available on the Internet at www.advantech-dlog.com (Download menu, login required for Linux information, please contact helpdesk@advantech-dlog.com). -
Page 27: Ms-Windows 10: Deactivate Automatic Windows Updates
Search updates once again to change the MS-Windows update state. 6.3.3. USB recovery stick The optional Advantech-DLoG recovery stick allows images to be backed up and restored onto the DLT-V83 when necessary (backup & recovery). Please contact your Advantech-DLoG sales representative if needed. -
Page 28: Wes 7 And Win 7 Prof.: Usb Icon In The Taskbar
For configuring DLT-V83, the DLoG Config version 4.0.3 (or higher) is required. The DLoG Config manual is available on the Internet at www.advantech-dlog.com (Download menu). Fig. 6.2: DLoG Config Tool main menu Page 28 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 29: Wi-Fi (Optional)
Always keep a distance of at least 20 cm between such devices and the DLT-V83 to reduce the risk of interference. Do not use the DLT-V83 in aircraft or hospitals without receiving prior authorization. Use in both is only permitted if such authorization has been obtained. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 29 of 122... -
Page 30: Wireless Performance
6.5.3. Antenna solutions for use in Germany The Advantech-DLoG antenna solutions are based on the prevailing IEEE 802.11 standard. This standard allows wireless data transfer at rates from 1 Mbps to 54 Mbps (300 Mbps if using IEEE 802.11n) using the 2.4 GHz and 5 GHz frequency band. -
Page 31: Laird Connection Manager (Lcm)
Fig. 6.4: LCM Configuration tab with the Manage Profiles button Click on Manage Profiles. Fig. 6.5: LCM Manage Profiles dialog box with the Admin Login tab Click the Admin Login tab. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 31 of 122... -
Page 32: Windows Zero Configuration (Wzc)
Fig. 6.6: Entering the LCM password: SUMMIT Default password: SUMMIT (Must be entered in upper-case characters.) 6.5.6. Windows Zero Configuration (WZC) You will find information on WZC in the MS-Windows online help system. Page 32 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 33: Wwan, Internal Gps (Optional)
Always keep a distance of at least 20 cm between such devices and the DLT-V83 to reduce the risk of interference. Do not use the DLT-V83 in aircraft or hospitals without receiving prior authorization. Use in both is only permitted if such authorization has been obtained. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 33 of 122... -
Page 34: Mini Sim Card For Wwan Operation
Driver installation Fig. 6.7: WWAN driver installation, Sierra Wireless driver to C:\Util\ Copy Sierra Wireless driver to "C:\Util\". Fig. 6.8: WWAN driver installation, WWAN 32-bit Open "WWAN 32-bit". Page 34 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 35: Fig. 6.9: Wwan Driver Installation, Run As Administrator
Fig. 6.10: WWAN driver installation, COM port After the installation, the COM ports should have been set up as shown in the figure above. To complete the installation, restart the terminal. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 35 of 122... -
Page 36: Fig. 6.11: Driver Configuration, Open Device Manager
Function test GSM / GPS Fig. 6.13: Function test GSM / GPS, Network and Sharing Center Open the Network and Sharing Center. Open Set up a new connection or network. Page 36 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 37: Fig. 6.14: Function Test Gsm / Gps, Connect To The Internet
Fig. 6.15: Function test GSM / GPS, wireless Select Dial-up. Fig. 6.16: Function test GSM / GPS, telephone number Enter *99***1# as telephone number and enter a name. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 37 of 122... -
Page 38: Fig. 6.17: Function Test Gsm / Gps, Network Connections
Fig. 6.18: Function test GSM / GPS, test connection Do not enter a user name or password. Click on Dial. The test connection is established. Fig. 6.19: Function test GSM / GPS, test connection status Page 38 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 39: Fig. 6.20: Deleting The Gps Test Connection
Open the file "C:\Util\WWAN32\teraterm\tte rmpro.exe". Fig. 6.22: GPS test, COM4 Shift to Serial and select "COM4". Fig. 6.23: GPS test position data GPS was activated successfully when the position data appears here. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 39 of 122... -
Page 40: External Gps Solution (Optional)
The GPS receiver has an integrated antenna for position data of the Global Positioning System (GPS) and communicates with the DLT-V83 via USB interface. We recommend using only a GPS receiver approved by Advantech-DLoG. Fig. 6.24: GPS receiver (optional) Installation The installation CD supplied with the GPS receiver includes installation files and a multi-lingual manual. -
Page 41: Can And Digital I/O Settings (Optional)
CAN and digital I/O settings (optional) To configure and test the CAN and digital I/O settings, the “IXXAT” driver is used. It is available at www.advantech-dlog.com/driver (Directory Advantech-DLoG Products -> Additional-Drivers- Software). Fig. 6.26: Start of the IXXAT driver installation When installing the “IXXAT”, configuration and test tools are copied to the DLT-V83. -
Page 42: Imanager
Hardware details such as the pin assignment of the CAN and Digital I/O interfaces are described here in the manual in: Chapter 13.4 CAN, digital I/O and second Ethernet interface (optional) Page 42 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 43: Configuring Screen Blanking (Optional)
This resets the sensitivity of the touchscreen to an operating system default setting, which can result in poorer detection of taps on the screen. You can use Reset to reset the software recalibration. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 43 of 122... -
Page 44: Erp Settings For Ac Devices
Configure Power Management and LAN Connection so that WakeOnLAN is deactivated. Example: Deactivate WakeOnLAN under WES 7: Fig. 6.28: Network Connection Properties, Advanced Figure 6.29: iManager: Network Connection Properties, Power Management Page 44 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 45: Power Options
To optimize the power consumption of the DLT-V83, adapt the power options accordingly. Relevant settings: − Time until the DLT-V83 automatically switches to power-saving mode. − Time until the screen switches off automatically. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 45 of 122... -
Page 46: Mechanical Mounting, Electrical Connection
To ensure that the limits set for exposure to radio waves are not exceeded: Install the DLT-V83 so that persons maintain a minimum distance of 20 cm to the antenna. Page 46 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 47: Important: Installation Of The Dlt-V83 On Vehicles
Moreover, the peripheral equipment and its cabling must be attached electrically isolated. If external antennas are being used, you must ensure that the antennas are isolated at the mounting point on the vehicle chassis. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 47 of 122... -
Page 48: Overview Of Mounting Steps
NOTICE: Physical damage Observe the following when connecting/removing external devices: Only use accessories that have been tested and approved by Advantech-DLoG for the respective DLT-V83. The DLT-V83 may not be connected to the power supply if external devices are being connected/removed (not applicable for USB devices). -
Page 49: Attaching The Device Mounting Bracket (Optional)
Attaching the device mounting bracket (optional) Observe the following information about the mounting brackets: − All support brackets and mounting parts supplied by Advantech-DLoG are only intended to be used for attachment of the industrial PCs and the peripheral devices and may not be misused. -
Page 50: Connecting Dc Devices To The Power Supply
Only connect or disconnect electrical connections when the device is in a de-energized state (electrically dead). Use only original power supply cables from Advantech-DLoG. Advantech-DLoG power cables meet the specific requirements for low-temperature flexibility, UV resistance, oil resistance, etc. -
Page 51: Important: Electrical Connection Of The Dlt-V83 To Vehicles
In DC-powered devices, always attach ring tongues on the supply voltage cable to the provided ground bolt situated on the connector panel (see Fig. 7.2: Position of the ground bolt). Fig. 7.2: Position of the ground bolt Ground bolt Advantech-DLoG DLT-V83 Series Manual V1.50 Page 51 of 122... -
Page 52: Electrically Isolated Installation Of Dc Devices
Moreover, the peripheral equipment and its cabling must be attached electrically isolated. If external antennas are being used, you must ensure that the antennas are isolated at the mounting point on the vehicle chassis. Page 52 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 53: Connecting Ac Devices To The Power Supply
DLT-V8315; otherwise, you may encounter start-up problems or malfunctions and there may even be irreparable damage to the device. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 53 of 122... -
Page 54: Attaching The Cable Cover
(e.g. during scanning). − Unused cable entry holes for the strain relief rail must be closed off with dummy grommets. − The Advantech-DLoG cable cover must then be secured to the DLT-V83. Page 54 of 122 DLT-V83 Series Manual V1.50... -
Page 55: Required Components
Fig. 8.2: Dummy grommets and cable grommets for various cable diameters Cable clips Dummy Cable grommets, open/broken grommets through at one position Diameter of the cable grommet is specified on each grommet (3.5 mm to 8.0 mm) Advantech-DLoG DLT-V83 Series Manual V1.50 Page 55 of 122... -
Page 56: Attaching Cable Grommets And Fixing Strain Relief In Place
Cable grommets and dummy grommets should be cut off as cleanly as possible. This is important in order to seal the industrial PC well. Figure 3: Cable grommets and dummy grommets Correct: Incorrect: Page 56 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 57: Fig. 8.4: Example Cable Grommet
Try to lay all cables parallel to each other without crossing each other. Close off the unused cable Fig. 8.6: Unused cable outlets sealed off outlets with dummy grommets. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 57 of 122... -
Page 58: Fig. 8.7: Power Supply Cable With Cable Clip On The Strain Relief Rail
This gives you the option of securing two cable clips located next to each other with a single screw. Example: Cables are fixed, dummy grommets are positioned Fig. 8.9: Cables and dummy grommets Page 58 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 59: Attaching The Cable Cover (Without Integrated Ups)
Make sure that the battery cable is not jammed. Loosely tighten the cylinder head screws ISO 4762-M4x10-A2 of the cable cover. Then fully tighten the screws with 3 Nm torque crosswise. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 59 of 122... -
Page 60: Pressure Compensation Element
Do not modify or remove the pressure compensation element; doing so would make the device leak and the IP protection would no longer be ensured. Fig. 8.12: Pressure compensation element - Do not modify or remove! Page 60 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 61: Power Supply Units, Pin Assignment
“Ignition on” means that a control signal can be routed to this connection (e.g., ignition of a vehicle), that matches the supply voltage level and is able to supply at least 1 W to the DLT-V83. The signal reference is DC-. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 61 of 122... -
Page 62: Power Supply, Power Consumption, Power Supply Unit Fuses
H / 250 V or similar produced by other manufacturers The symbol for the fuse is FA. You will find the exact position on the sticker located on the connection plate of the DLT-V83. Page 62 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 63: Connections, Expansion Interfaces Packages
D I/O Digital In/Out RJ45 LAN Ethernet 10/100/1000 MBit/s Expansion interfaces package 2 (optional) CAN interface D I/O Digital In/Out RJ45 LAN Ethernet 10/100/1000 MBit/s The symbol for the fuse is FA. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 63 of 122... -
Page 64: Dc Connection Cable (Power Supply Cable)
NOTICE: Physical damage Use only original power supply cables from Advantech-DLoG. Advantech-DLoG power cables meet the specific requirements for low-temperature flexibility, UV resistance, oil resistance, etc. If other power supply cables are used: The user/operator of the industrial PC is solely responsible for the resulting damage. -
Page 65: Fig. 9.4: Dc Connection Cable Assignment - Drawing
Power supply units, pin assignment Fig. 9.4: DC connection cable assignment - drawing DC+ ; blue or grey wire Advantech-DLoG DLT-V83 Series Manual V1.50 Page 65 of 122... -
Page 66: Integrated Ac Power Supply Unit
The cable of the angled power connector is equipped with an On/Off-switch for the power grid. NOTICE: Physical damage Use only angled AC power cables from Advantech-DLoG. These meet the specific requirements for low-temperature flexibility, UV resistance, oil resistance, etc. -
Page 67: Power Supply, Power Consumption, Power Supply Unit Fuses
Siba 179200.1 or similar produced by other manufacturers The symbol for the fuse is FA. You will find the exact position on the sticker located on the connection plate of the DLT-V83. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 67 of 122... -
Page 68: Measurement Results Of The Power Consumption According To Erp
(SIQ ID 503; Calibration valid till 2015-07-01) 9.2.4. Special connection cable for AC device To facilitate achieving the lower power state: Set the switch of the Advantech-DLoG power supply cable to Off. Page 68 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 69: Connections, Expansion Interface Packages
USB 2.0 interfaces (HI-SPEED™), bootable Expansion interfaces package 1 (optional) D I/O Digital I/O RJ45 LAN Ethernet 10/100/1000 Mbps Expansion interfaces package 2 (optional) CAN interface D I/O Digital I/O RJ45 LAN Ethernet 10/100/1000 Mbps Advantech-DLoG DLT-V83 Series Manual V1.50 Page 69 of 122... -
Page 70: Antenna Cap, Service Usb, Sim Card Slot
Appropriate procedure Unscrew the two screws from the antenna cap. - Use an Allen wrench (size 3 mm) for high Advantech-DLoG standard antennas. - Use a Torx wrench for Advantech-DLoG low profile antennas. Lift the antenna cap carefully to avoid pulling on the antenna connection cables (max. -
Page 71: Service Usb
10.2. Service USB The Service USB interface under the antenna cap may be used only for service purposes, e.g. to install software updates. Fig. 10.3: Service USB under the antenna cap Advantech-DLoG DLT-V83 Series Manual V1.50 Page 71 of 122... -
Page 72: Micro Bluetooth Adapter And Service Usb
Push in the SIM card tray exactly at the location provided. Otherwise, there is a risk of the tray and Mini SIM card dropping into the device when pushing in the tray. Fig. 10.4: Opened SIM card slot under the antenna cap Page 72 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 73: Integrated Ups (Optional)
Only use the DLT-V83 within the permitted temperature and humidity range. Do not subject it to strong impacts and vibrations that exceed what is specified by the class 5M3/5M2 (DIN EN 60721-3-5). Advantech-DLoG DLT-V83 Series Manual V1.50 Page 73 of 122... -
Page 74: Battery Pack Specification, Ups
Provide for sufficient ventilation of the DLT-V83 when charging the battery packs. 11.3. No repair/replacement of the battery packs If the battery packs are faulty, the entire cable cover, including the integrated battery packs, must be replaced. Page 74 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 75: Optional Equipment/Accessories
− Integrated DC power supply unit; For details, see section 9.1 Integrated DC power supply unit Available for the DLT-V8315: − Integrated AC power supply unit; For details, see section 9.2 Integrated AC power supply unit Advantech-DLoG DLT-V83 Series Manual V1.50 Page 75 of 122... -
Page 76: Pre-Converter And Power Cables (Optional)
Band 1: 2400 to 2485 MHz Band 2: 5150 to 5875 MHz Antenna gain Max. 5 dBi (without loss through the cable) 50 Ω Impedance Polarization Vertical/Horizontal Maximum transmitting power 100 mW / 20 dBm Page 76 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 77: Integrated Wi-Fi, Wwan, And Gps Antenna (Optional)
GSM1900: 1850 to 1990 MHz UMTS: 1920 to 2170 MHz Antenna gain Max. 3 dBi (without loss through the cable) 50 Ω Impedance Polarization Vertical/Horizontal Maximum transmitting power 100 mW / 20 dBm Advantech-DLoG DLT-V83 Series Manual V1.50 Page 77 of 122... -
Page 78: External Wi-Fi Antenna, Remote (Optional)
N type or TNC N, jack, female, bottom RSMA plug for RSMA socket on the terminal Scope of delivery 3 m antenna cable Maximum transmitting 100 mW / 20 dBm power Page 78 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 79: External Wwan Antenna, Remote (Optional)
50 Ω Impedance Polarization Vertical/Horizontal Dimensions 33 mm x 89 mm Maximum transmitting Class 1, 4, E2* + typically 0 dBi (5 dBi) (antenna gain) power *specification taken from: www.sierrawireless.com (Feb 2015) Advantech-DLoG DLT-V83 Series Manual V1.50 Page 79 of 122... -
Page 80: Wi-Fi Card (Optional)
12.8. Wi-Fi card (optional) Technical data Wi-Fi PCIe MiniCard Integrated in the device at the factory by Advantech-DLoG (internal PCIe MiniCard slot). Driver Generally, only drivers for Wi-Fi cards approved by Advantech- DLoG can be integrated into operating system images. -
Page 81: Gps Receiver (Optional)
The GPS receiver has an integrated antenna for position data of the Global Positioning System (GPS) and communicates with the DLT-V83 via USB interface. Installation information is included with the GPS receiver. We recommend using only a GPS receiver approved by Advantech-DLoG. Fig. 12.5: GPS receiver (optional) Properties: −... -
Page 82: Voice Kit (Optional)
The internal speaker of the DLT-V83 is automatically deactivated if the Voice Kit is connected. The handheld microphone is connected to the Audio/Mic interface of the DLT-V83. Please use only handsets from “OTTO Communications”. Please contact your Advantech-DLoG sales representative if needed. Fig. 12.6: Voice Kit microphone (optional) Voice Kit configuration under MS-Windows To configure the voice kit, use the Control Panel menu Audio Settings. -
Page 83: Keyboards And Keyboard Mounts (Optional)
Optional equipment/accessories 12.13. Keyboards and keyboard mounts (optional) Any USB keyboard can be connected to the DLT-V83. Advantech-DLoG offers the following keyboards with protection class IP 65. A mountable SMALL keyboard with a protection class IP 65; available keyboard layouts: German, English, French. -
Page 84: Stylus For Touchscreens (Optional)
Optional equipment/accessories 12.14. Stylus for touchscreens (optional) Advantech-DLoG offers touch stylus kits for resistive and PCT touchscreens. Use only touch stylus kits that have been approved by Advantech-DLoG. Fig. 12.10: Stylus examples Stylus with mounting Stylus with mounting for resistive touchscreen for PCT touchscreen 12.15. -
Page 85: Usb Recovery Stick (Optional)
Optional equipment/accessories 12.16. USB recovery stick (optional) The optional Advantech-DLoG recovery stick allows images to be backed up and restored onto the DLT-V83 when necessary (backup & recovery). 12.17. Scanner and scanner bracket (optional) You can connect scanners to either the USB interface or the serial interface. If connected to COM1, the scanner can be powered through the interface with a voltage of 5 V or 12 V (option). -
Page 86: Serial Interfaces
100 m given in the specification (IEEE 802.3 standard). The solution here is the use of a shorter cable. Page 86 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 87: Can, Digital I/O And Second Ethernet Interface (Optional)
A 120 Ω terminating resistor is mounted on the pcb. A matching driver is integrated in the operating system. An API description is available upon request. Contact your Advantech-DLoG sales representative if necessary. Fig. 13.3: Pin assignment of CAN interface... -
Page 88: Digital I/O Interface
The Digital I/O interface is galvanically separated from the overall system. A matching driver is integrated in the operating system. An API description as well as sample application are available upon request. Contact your Advantech-DLoG sales representative if necessary. Pin assignment:... -
Page 89: Network Adapter 2, Ethernet (10/100/1000)
In challenging environments, electrically-isolated connections (via the RS-422/485 option) or external converter from EIA-232-E according to EIA-422/485 are strongly recommended. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 89 of 122... -
Page 90: Automatic Shutdown
Once the shut-off delay (after run time) has elapsed, the operating system will shut down and the device will automatically shut down (e.g. after three minutes or a signal from the operating system). Page 90 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 91: Configuration
The “DLoG Config manual” can be found online in the download center at www.advantech-dlog.com. The configuration under Linux is explained in the Advantech-DLoG Linux manual. This manual is available on the Internet (Download menu, login required for Linux information, please contact helpdesk@advantech-dlog.com). -
Page 92: Technical Data
Up to 8 GB DDR3L technology BIOS AMI UEFI BIOS @ 128 Mb Programmable in the system, BIOS POST self-test Real-time clock Real-time clock with a power reserve of up to 5 years Page 92 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 93: Memory
15" XGA 1024 x 768, 400 cd/m Brightness control The LCD display of the DLT-V83 series fulfills the highest quality standards and was inspected for pixel defects. However, due to technological reasons pixel defects can occur. This is not a malfunction; it is a part of the technical specifications. -
Page 94: Environmental Conditions
− US Highway Truck according to MIL-STD 810F DLT-V8315: − Class 5M2 according to EN 60721-3-5, − US Highway Truck according to MIL-STD 810F For details, see section 11 Integrated UPS (optional). Page 94 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 95: Resistive Touchscreen
Tapping: > 5 million times with rubber test pen resistance Swiping: > 100,000 times with polydactyl pen Resistance to Alcohols, dilute acids, dilute alkalies, esters, hydrocarbons, ketones, industrial household cleaning agents (according to DIN 42 115) chemicals Advantech-DLoG DLT-V83 Series Manual V1.50 Page 95 of 122... -
Page 96: Version Suitable For Use In Sunlight (Optional)
ISO 2813, 7668; ASTM D 523, D 2457; DIN 67539 Mechanical properties Thermally pre-stressed, acid-etched planibel float glass Chemical resistance Resistant to chemicals. Not resistant to strong acids, gasoline and diesel. Page 96 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 97: Operating Systems (Optional)
Up to 24 bit color depth, depending on which LCD is used Intel® Atom™ D525 CPU ® VGA controller Intel Gen 3.5 DX9, MPEG2 hardware decoder Shared Memory architecture Up to 24 bit color depth, depending on which LCD is used Advantech-DLoG DLT-V83 Series Manual V1.50 Page 97 of 122... -
Page 98: 15.12. Touch Interface
Integrated carrier Two integrated status LEDs 15.14. Audio interface for handset Audio handset-connection Microphone input Audio out max. 2 W @ 8 Ohm ESD Level 3 protected (according to EN 61000-4-2) Page 98 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 99: 15.15. Internal Speaker, Sound
The internal speaker is configured in the audio settings for the operating system in question. Fig. 15.1: Internal speaker position 15.16. Integrated UPS (optional) For details about the uninterruptible power supply, see section 11 Integrated UPS (optional). Advantech-DLoG DLT-V83 Series Manual V1.50 Page 99 of 122... -
Page 100: 15.17. Device Dimensions
Device type Building depth (Mass X, see figure) DLT-V8310 standard resistive touchscreen 90,0 mm DLT-V8310 sunlight readable resistive touchscreen 90,0 mm DLT-V8310 PCT touchscreen 91,5 mm DLT-V8310 with screen-defroster front 90,7 mm Page 100 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 101: Dlt-V8312
Device type Building depth (Mass X, see figure) DLT-V8312 standard resistive touchscreen 93,0 mm DLT-V8312 sunlight readable resistive touchscreen 94,7 mm DLT-V8312 PCT touchscreen 96,0 mm DLT-V8312 with screen-defroster front 94,2 mm Advantech-DLoG DLT-V83 Series Manual V1.50 Page 101 of 122... -
Page 102: Dlt-V8315
The building depth of the DLT-V8315 varies depending on the type of touchscreen: Device type Building depth (Mass X, see figure) DLT-V8315 standard resistive touchscreen 98 mm DLT-V8315 PCT touchscreen 97 mm Page 102 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 103: 15.18. Vesa Drill Holes
DLT-V83. DLT-V8310 VESA drill holes Dimensions without add-ons (in mm): Fig. 15.5: Position of the VESA drill holes DLT-V8310 Depth of thread: M6 x 6mm. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 103 of 122... -
Page 104: Fig. 15.6: Position Of The Vesa Drill Holes Dlt-V8312
Technical data DLT-V8312 VESA drill holes Dimensions without add-ons (in mm): Fig. 15.6: Position of the VESA drill holes DLT-V8312 Depth of thread: M6 x 6mm. Page 104 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 105: Fig. 15.7: Position Of The Vesa Drill Holes Dlt-V8315
Technical data DLT-V8315 VESA drill holes Dimensions without add-ons (in mm): Fig. 15.7: Position of the VESA drill holes DLT-V8315 Depth of thread: M6 x 6mm. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 105 of 122... -
Page 106: 16. Maintenance, Cleaning
Also check whether the bracket is secured firmly to vehicle. Check whether all connected cables are secured and the cable cover shuts tightly. A regular inspection and maintenance of the entire system is necessary. Page 106 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 107: Cleaning The Device
NOTICE: Do not apply cleaning agent to the touchscreen; apply it to the cleaning cloth. Then wipe off the touchscreen with it. Then use distilled water to remove any residual cleaner. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 107 of 122... -
Page 108: Touchscreen Protective Film (Optional)
Position the protective film with the adhesive side facing downwards tight at one corner of the viewing window. Carefully press on the foil. Then using a wiper (wooden wiper) to push out any air bubbles to the corners. Page 108 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 109: Malfunctions
No Internet No Mini SIM card is Insert SIM card into SIM slot / connection installed. / incorrect request access number from access number provider Advantech-DLoG DLT-V83 Series Manual V1.50 Page 109 of 122... -
Page 110: Reasonably Foreseeable Misuse
18.3. Stationary use with AC power supply unit Please observe that the switch of the Advantech-DLoG power supply cable must be set to On in order to be able to start the DLT-V83. Page 110 of 122 DLT-V83 Series Manual V1.50... -
Page 111: Guidelines And Certificates
The antenna has to be kept at least 20 cm away from people. Any change or modification which is not expressly approved in the corresponding pages can lead to the withdrawal of the operating license for this device. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 111 of 122... -
Page 112: Ices Canada
We hereby confirm the conformity of our products compliant with the RoHS Directive 2011/65/EU of the European Parliament and Council of June 8, 2011 on the restriction of the use of hazardous substances in electrical and electronic equipment. Page 112 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG... -
Page 113: Red (Radio Equipment Directive) 2014/53/Eu
Tämä laite täyttää direktiivin 2014/53/EU (EY) olennaiset vaatimukset ja on [Finnish]: siinä asetettujen muiden laitetta koskevien määräysten mukainen. Svenska Denna utrustning är i överensstämmelse med de väsentliga kraven och [Swedish]: andra relevanta bestämmelser i Direktiv 2014/53/EU. Advantech-DLoG DLT-V83 Series Manual V1.50 Page 113 of 122... -
Page 114: Eco-Design Directive (2009/125/Ec)
(2009/125/EC), which prescribes environmentally friendly design for products involved in energy consumption. 19.6. CE marking The devices of the DLT-V83 series were tested and fulfill the CE conformity requirements and carry the CE mark on the rear side of the device. 19.7. CCC, SRRC China Several DLT-V83 models are CCC- and SRRC-certified and carry the respective mark on the device label. -
Page 115: Declaration Of Conformity
Guidelines and certificates 19.9. Declaration of conformity Advantech-DLoG DLT-V83 Series Manual V1.50 Page 115 of 122... -
Page 116: Recycling Information
Technical customer support Please contact your distributor, your sales representative or the Advantech-DLoG customer service to receive technical support. Please have the following information available: − Product name −... -
Page 117: Return Shipment Form
[ ] Unit was already damaged on delivery (please enclose a copy of the delivery note) [ ] Delivery was incomplete Missing parts: [ ] The following error occurs when operating the unit: [ ] Separate error report is enclosed Advantech-DLoG DLT-V83 Series Manual V1.50 Page 117 of 122... -
Page 118: List Of Figures
Fig. 9.1: DC power supply connector with connector detail view ................61 Fig. 9.2: DC device external connections with optional expansion interfaces ............63 Fig. 9.3: DC connection cable, original Advantech-DLoG ..................64 Fig. 9.4: DC connection cable assignment - drawing ....................65 Page 118 of 122 DLT-V83 Series Manual V1.50... - Page 119 Fig. 15.5: Position of the VESA drill holes DLT-V8310 ..................103 Fig. 15.6: Position of the VESA drill holes DLT-V8312 ..................104 Fig. 15.7: Position of the VESA drill holes DLT-V8315 ..................105 Advantech-DLoG DLT-V83 Series Manual V1.50 Page 119 of 122...
- Page 120 Page 120 of 122 DLT-V83 Series Manual V1.50 Advantech-DLoG...
Need help?
Do you have a question about the DLT-V83 SERIES and is the answer not in the manual?
Questions and answers