Preparation Work At The Factory (Delivery Status); Sim Card For Wwan (Customer-Specific) - Advantech DLoG DLT-V72 Series User Manual

Hide thumbs Also See for DLoG DLT-V72 Series:
Table of Contents

Advertisement

11.2. Preparation work at the factory (delivery status)

The following preparations have already been carried out at the factory for the optional
WWAN functionality of the DLT-V72:
The WWAN radio card and the corresponding drivers are installed.
GNSS is enabled at the factory
NOTICE

11.3. SIM card for WWAN (customer-specific)

A SIM card is required in addition to the WWAN card. The SIM card must be plugged in
into the SIM card slot underneath the DLT-V72 antenna.
NOTICE
NOTE
DLT-V72 Series User Manual V2.70
Prevent system malfunction and property damage
Radio cards are located inside the devices and are not accessible
from the outside. Only the manufacturer and its authorized service
centers may open the device and install/remove radio cards.
Prevent system malfunction and property damage
Before opening the antenna:
Please refer to chapter 7.2 Connectors under the antenna to find
information about correctly opening and closing the antenna (required
tools, etc.).
Inserting the SIM card: DLT-V72 must be switched off!
If the SIM card contains a PIN, the customer must set up an application
for the PIN query. For this reason, we recommend not using a PIN
120 / 173
WWAN Configuration

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlog dlt-v7210 pDlog dlt-v7210 rDlog dlt-v7210 dDlog dlt-v7212 pDlog dlt-v7212 rDlog dlt-v7212 d ... Show all

Table of Contents