Procedure; Inserting The Rubber Seal In The Cable Compartment; Fig. 13.4: Rubber Seal Inserted In The Cable Compartment - Advantech DLoG DLT-V72 Series User Manual
Hide thumbs
Also See for DLoG DLT-V72 Series:
- Startup manual (98 pages) ,
- Quick start manual (8 pages) ,
- User manual (191 pages)
Table of Contents
Advertisement
13.3. Procedure
13.3.1. Inserting the rubber seal in the cable compartment
1. Insert the rubber seal in the cable compartment.
2. Place the rubber seal in the frame of the cable compartment (see figure).
3. Press the plugs of the rubber seal into the holes of the frame.
DLT-V72 Series User Manual V2.70
Fig. 13.4: Rubber seal inserted in the cable compartment
140 / 173
Electrical Installation
Advertisement
Chapters
Table of Contents
Troubleshooting
