Advantech DLoG DLT-V72 Series User Manual page 101

Available parameters in the Connection and Security sections:
Connect automatically when
the network is in range
Connect to a more preferred
network if available
Connect even if the network
is not broadcasting its name
(ssid)
The security settings (Fig.10.16: Advanced Security Settings dialog ) must be adapted.
These settings differ depending on the network.
The Security Type must be selected first. The following options are available:
No authentication (Open)

WPA2-Personal

WPA2-Enterprise

CCKM

The encryption process (Encryption Type) is selected then. The options available here
depend on the selected Security Type.
None

WEP

AES

This results in the following selection options and settings:
DLT-V72 Series User Manual V2.70
Enable this parameter to set up an automatic
connection to the network.
In the event of multiple profiles being present, this
option can be used to select the preferred profile.
This option can be used to set that a connection is still
established when the name of the network is not
being transmitted.
101 / 173
WLAN Configuration