After Image Reinstallation: Driver Installation; Standard" Driver Installation Wes7, Win7Pro, Win10Iotent; Fig. 10.2: Setup.exe For 64 Bit Operating System Win10Iotent (Sparklan Wlan) - Advantech DLTV72INT User Manual

10.6.3. After image reinstallation: Driver installation

If the image has been reinstalled, the DLT-V72 must be set up again using the Sparklan
WLAN driver. Two drivers are available:

Driver for Win7Pro and WES7

Driver for Win10IoTEnt

10.6.4. "Standard" Driver installation WES7, Win7Pro, Win10IoTEnt

1. Open the corresponding installation directory depending on the OS.
2. Run Setup.exe to start the installation.
NOTE

Fig. 10.2: Setup.exe for 64 bit operating system Win10IoTEnt (Sparklan WLAN)

DLT-V72 Series User Manual V2.74
The following installation example shows the Win 8.1 IndPro \ Win 10
IoT driver. For Win 7 installation, please use the corresponding Win7
driver.
95 / 189
WLAN Configuration